TWS SERIES - PC TOUCH TYPE Porous Materials Density Tester
TWS-Large Size PC
000 000pc py Bulk
001 000pc py BK+ mode
002 000pc wax mode
003 000pc ds mode
004 TWS-V2 真空機百邇來WEB 配件
005蠟爐百邇來WEB 配件
006印表機百邇來WEB 配件
TWS-Large Size PC
000 000pc py Bulk
001 000pc py BK+ mode
002 000pc wax mode
003 000pc ds mode
004 TWS-V2 真空機百邇來WEB 配件
005蠟爐百邇來WEB 配件
006印表機百邇來WEB 配件
TWS-Large Size PC
Feature of product
Maximum weight: 1500g / 2000g / 3000g / 6000g
Weighing precision: 0.01g / 0.01g / 0.01g / 0.1g
Density precision: 0.001g/cm3

According to ASTM C20, C134, C373, C329, D4254, D854, GB/T1966, 1933, 2413, 2834, AASHTO T166, T0705 standard.
The machine is equipped with 4 functions.
Show Bulk density, Wet density, Porosity, Absorption, Apparent DS, Open pores, Close porosity, Total porosity directly.

Quantity

Suitable for :
Ceramic industry, pill medicine, porous material research institutes, construction, geological exploration, roadway research, permanent magnet Sm, Co, Nd, Dy, secondary battery, Li, Ni, Co, Mn, and mixed rate earth, Mn Zn ferrite, Ni Zn ferrite, NdFeB, and Sm Co, rare earth magnetic material, treating water collapse material.

Principle :
According to ASTM C20, C134, C373, C329, D4254, D854, GB/T1966, 1933, 2413, 2834, AASHTO T166, T0705 standard, using the Archimedes principle buoyancy method, optional boiling water method, sealing wax method, and the vacuum saturation method can accurately and quickly display the bulk density, porosity, and water absorption results.

Specific :
1. BULK : Adopting the water saturation method for a porous material.
2. BK+ : Adopting water saturation method for porous absorbent material. With five groups of memory functions.
3. WAX : A wax sealing method for porous absorbent material.
4. DS : Nonabsorbent material.

 

Features :
1. The infrared temperature sensor can automatically detect water temperature and perform water temperature compensation.
2. With automatic temperature compensation, manual temperature compensation, and solution compensation functions.
3. Directly read body density, apparent porosity, wet density, and volume in absorbent product density measurement mode.
4. Built-in five groups of memory functions can measure five groups of samples at the same time in absorbent product density measurement mode.
5. The density of the absorbent product can be directly read by the sealing wax method.
6. Directly display the value of the development research of new materials. With HI and LO limit functions and a buzzer, the device determines whether the specific gravity of the test object is qualified in non-absorbent product density measurement mode: It has the function of two groups mixing ratio. 
7. With RS-232 & USB Interface.
8. Large-size water tank design is adopted to reduce the error caused by the buoyancy of the suspension rail. The water tank size is 210× 170 × 120 mm.

MODEL TWS-1500PC TWS-2000PC TWS-3000PC TWS-6000PC
Maximum weight : 1500g 3000g 6000g
Weighting precision : 0.01g 0.1g
Density precision : 0.001 g/cm3
Wet density : 0.001 g/cm3
Porosity : 0.01 %
Absorption : 0.01 %
Apparent DS : 0.001 g/cm3
Open pores : 0.001 g/cm3
Close porosity : 0.01 %
Total porosity : 0.01 %
Max ratio : 0.01 %
Mode

Bulk density (Adopting water saturation method)

Porous material : Show Bulk density, Wet density, Porosity, Absorption, Apparent DS, Open pores, Close porosity, Total porosity

Bulk density (Adopting water saturation method)
(Five groups of memory functions)

Porous absorbent material : Show Bulk density, Wet density, Porosity, Absorption, Apparent DS, Open pores, Close porosity, Total porosity

Bulk density (Wax sealing method)

Porous absorbent material : Show Bulk density directly

Nonabsobent material : Show Density, Volume, Mix ratio directly

 

We use cookies to provide the services and features offered on our website, and to improve our user experience. By using this website, you consent to the use of cookies.

OK