UV glue, solid, liquid density tester

Suitable for:
Solid mode:
Laboratory of solder, brass, bronze, silver, nickel, zinc, plastic, rubber, wire and cable, glass, film, hard alloy, soft synthetic leather, leather, elastic material, oil seal, oil ring, new materials, and other recycling industries.

Liquid mode:
Acid Solution, Alkaline Solution, Saline Solution, Anti-oxidant Solution.

Principle:
Solid mode:
referring to the standards of ASTM, JIS, and ISO, and by applying the buoyancy of the object immersed in liquid and the hydrostatics principle, the density, volume mixture ratio of these solid materials can be shown.  

Liquid mode:
In accordance with ASTM, JIS ISO standards, and by adopting the buoyancy method of the Archimedean principle, the S.G. and concentration of the liquid can be shown rapidly. 

Mode:
It has six measurement functions:

1. Specific Gravity Measurement Mode - Measures sample specific gravity and volume.

2. Mixing ratio specific gravity measurement mode (1), (2) - Setting this function will obtain the proportion content of the main materials of the sample.

3. Specific gravity measurement of viscous samples - Measure the specific gravity and volume of viscous samples

4. Viscous sample shrinkage measurement mode - Measure the shrinkage of viscous samples before and after curing.

5. Liquid Specific Gravity Measurement Mode - Measures the specific gravity of liquids.

6. Liquid sample shrinkage measurement mode - Measure the shrinkage of liquid samples before and after curing.